Product ID:U221 BALL PLUGGING COMPOUND, 160221C
MSDS Date:08/10/1993
FSC:8040
NIIN:00F034832
Kit Part:Y
MSDS Number: BTKHN

Emergency Phone: 708-234-8100

Info Phone: 708-234-8100

Cage: 23693

Telephone: 312-234-8100

Cage: 23693

EPICHLOROHYDRIN-BISPHENOL A EPOXY RESIN (FURTHER

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:MFR LISTED NO INFORMATION ABOUT THE
CARCINOGENICITY OF THIS MATERIAL. HMIS DOES NOT EXPECT IT TO BE
CARCINOGENIC.
Effects of Overexposure:INGESTED:POSSIBLE G/I IRRITATION.
INHALED:POSSIBLE RESPIRATORY IRRITATION. EYE:MAY CAUSE IRRITATION &
TRANSIENT CORNEAL INJURY. SKIN:PROLONGED/REPEATED SKIN CONTACT MAY
CAUSE IRRITATION. MAY CAUSE SEN SITIZATION. ABSORPTION OF TOXIC
AMOUNT UNLIKELY.
Medical Cond Aggravated by Exposure:NO INFORMATION GIVEN ON MSDS BY
MFR.

First Aid:IF ANY IRRITATION PERSISTS OR IS SEVERE,SEE A DOCTOR.
EYE:FLUSH W/WATER 15 MIN,HOLD LIDS OPEN. SKIN:REMOVE CONTAMINATED
CLOTHING AND LAUNDER BEFORE REUSE. WASH WITH SOAP & WATER UNTIL
REMOVED. INGESTE D:REMOVE TO FRESH AIR. RESTORE/AID BREATHING AS
NEEDED. INGESTED:IMMEDIATELY GIVE 2 LARGE GLASSES OF MILK OR WATER
AND INDUCE VOMITING. (NOTHING BY MOUTH IF UNCONSCIOUS.) GET
IMMEDIATE MEDICAL CARE.

Flash Point Method:PMCC
Flash Point:>199F,>93C
Extinguishing Media:USE FIRE EXTINGUISHER DESIGNED FOR COMBUSTIBLE
LIQUID FIRES (CARBON DIOXIDE, ALL PURPOSE DRY CHEMICAL OR ALCOHOL
FOAM).
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SCBA. WATER MAY BE
INEFFECTIVE/MAY BE USED TO COOL EXPOSED CONTAINERS, PREVENTING
PRESSURE BUILDUP, AUTOIGNITION AND/OR EXPLOSIONS.
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSITION PRODUCTS
MAY BE HEALTH HAZARD. SYMPTOMS MAY BE DELAYED-GET MEDICAL
ATTENTION. COOL CONTAINERS TO PREVENT EXPLOSION/AUTOIGNITION.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. KEEP SPECTATORS
AWAY. PLACE LEAKING CONTAINERS IN WELL VENTILATED AREA. ADD INERT
ABSORBENT.PREVENT MATERIALL FROM ENTERING SEWERS/STREAMS &
GROUNDWATER BY DIKING/IMPOUNDIN G. SPILLS MAY BE REPORTABLE.
800-424-6802
Neutralizing Agent:NO INFORMATION GIVEN ON MSDS BY MFR.

Handling and Storage Precautions:AVOID CNTCT W/SKIN & EYES. AVOID
BREATHING VAPORS. KEEP CONTAINERS CLOSED WHEN NOT IN USE. STORE AT
TEMPERATURES BELOW 120 F.
Other Precautions:REMOVE ALL CONTAMINATED CLOTHING IMMEDIATELY. DISPOSE
OF CONTAMINATED LEATHER GOODS. WASH CONTAMINATED CLTHING BEFORE
REUSE. WASH SKIN THOROUGHLY W/SOAP & H2O AFTER HANDLING. DO NOT USE
SOLVENTS TO CL EAN SKIN - POSSIBLE INCREASED ABSORPTION

Respiratory Protection:WHEN EXPOSED TO AEROSOLS OR VAPORS, USE FULL
FACE ORGANIC VAPOR CARTRIDGE WITH PARTICULATE PRE-FILTER. IN
EMERGENCY SITUATIONS, OR WHEN USED IN CONFINED AREA USE FULL FACE,
SELF CONTAINED BREATHING AP PARATUS.
Ventilation:LOCAL EXHAUST SHOULD BE ADEQUATE.
Protective Gloves:USE BARRIER CREAM PLUS IMPERVIOUS GLOVES
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:FOR OPERATIONS WHERE CONTACT MAY OCCUR,USE
IMPERVIOUS BODY COVERING. SAFETY SHOWER & EYEWASH FACILITY SHOULD
BE AVAILABL
Work Hygienic Practices:IN CONJUNCTION W/SUGGESTED PROTECTIVE
EQUIPMENT,WASH W/SOAP & WATER BEFORE BREAKS, MEALS, & END OF WORK
DAY.
Supplemental Safety and Health
THIS IS THE EPOXY RESIN PART OF THE "KIT". NO MSDS WAS RECEIVED FROM
AIR FORCE FOR THE HARDENER.

HCC:N1
NRC/State Lic Num:NONE
Spec Gravity:1.13
Solubility in Water:PARTIALLY SOLUBLE
Appearance and Odor:CLEAR YELLOW MEDIUM VISCOSITYLIQUID
W/CHARACTERISTIC PHENOLIC ODOR.**9.4 LB/GAL
Percent Volatiles by Volume:N/K 0
Corrosion Rate:UNKNOWNN

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, CAUSTICS, OR ACIDS.
Stability Condition to Avoid:AVOID STORAGE AT ELEVATED TEMPERATURES.
Hazardous Decomposition Products:FUMES PRODUCED WHEN HEATED TO
DECOMPOSITION MAY INCLUDE: CARBON MONOXIDE, AND CARBON DIOXIDE.
Conditions to Avoid Polymerization:BASES. IF COMBINED WITH AN ALIPHATIC
AMINE IN MASSES OF >1 LB, AN IRREVERSIBLE, EXOTHERMIC
POLYMERIZATION WILL OCCUR.

Waste Disposal Methods:INCINERATE OR USE BIOLOGICAL TREATMENT I/A/W
FEDERAL, STATE, AND LOCAL REGULATIONS. THIS MATERIAL IS A HAZARDOUS
WASTE UNDER RCRA REGULATIONS BECAUSE OF REACTIVITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.